2008 NSTI Nanotechnology Conference and Trade Show - Nanotech 2008 - 11th Annual

Partnering Events:

TechConnect Summit
Clean Technology 2008

Nanosilicate Filled Poly (vinyl chloride-co-vinyl acetate) and Epoxy Coatings for Steel Corrosion Protection

L. Allie, J. Thorn, H. Aglan
Tuskegee University, US

nanocomposite, polyimide, accelerated aging, fracture toughness

The corrosion protection of nanosilicate filled poly (vinyl chloride - co - vinyl acetate) (VYHH) and epoxy resins has been studied. Nanosilicate was incorporated into VYHH at 0%, 0.5% and 1.5%wt loadings, and into epoxy at 0% and 1.5% loadings. Steel substrates were prepared and coated with each of the prepared coatings. Some of the samples were submerged in 5% NaCl solution and tested periodically using Electrochemical Impedance Spectroscopy (EIS) to study the effect of the nanosilicate on the corrosion protection of the coatings. EIS measurements showed that VYHH/0.5%nanosilicate provided superior protection against corrosion. The nanosilicate filled epoxy exhibited increased resistance to corrosion after 21 days. Films were cast from each system to be used to evaluate the mechanical performance of the coatings. Notched and unnotched samples were cut from the films and some were submerged in the 5%NaCl solution while some were left unsubmerged as controlled samples. The tearing energy of the neat VYHH coating decrease by 27% after submersion, while the nano coatings showed a slight increase. The neat epoxy showed no change in the tearing energy after submersion, while that of the nano coating was increased by 14% after submersion. Differential Scanning Calorimetry (DSC) results showed that the nano coatings have improved the thermal barrier properties compared to the neat coatings and correlates with the mechanical and EIS measurements.

Nanotech 2008 Conference Program Abstract