Nano Science and Technology Institute
Nanotech 2010 Vol. 1
Nanotech 2010 Vol. 1
Nanotechnology 2010: Advanced Materials, CNTs, Particles, Films and Composites

Chapter 5:

Composite Materials

-Surface Modification and Performance Analysis of Jute Based Nanophased Green Composite
 M.K. Hossain, M.W. Dewan, M. Hosur, S. Jeelani, V. Rangari
 Tuskegee University, US
-Chemical and Phase Transformations of Nanocrystalline Oxides in a Carbon Nanoreactor
 A.M. Volodin, V.I. Zaikovskii, A.F. Bedilo, K.J. Klabunde
 Boreskov Institute of Catalysis, RU
-Integration of SWCNT into Olefin polymer composites
 J. Guan, B. Simard
 National Research Council Canada, CA
-Role of Nanoparticles in Life Cycle of Nanocomposites
 X. Gu, G. Chen, M. Zhao, S.S. Watson, D. Zhe, P.E. Stutzman, T. Nguyen, J.W. Chin, J.W. Martin
 NIST, US
-Surface tailoring of carbon fabric reinforced PES composites with micro and nano PTFE fillers
 M. Sharma, J. Bijwe
 Indian institute of Technology, Delhi, IN
-Characterizing Nanoparticle Emissions from Burning Polymer Nanocomposites
 M.R. Nyden, R.H. Harris, Y.S. Kim, R.D. Davis, N.D. Marsh, M. Zammarano
 National Institute of Standards and Technology, US
-New method for the caracterization of abrasion-induced nanoparticle release into air from nanomaterials
 L. Golanski, A. Guiot, F. Tardif
 CEA, FR
-Direct Evidence of Nanoparticle Release from Epoxy Nanocomposites Exposed to 295 nm-400 nm UV Radiation
 T. Nguyen, B. Pellegrin, P. Stutzman, A. Shapiro, E. Byrd, X. Gu, J. Chin
 NIST, US
-An analytical method to quantify the release of silica nanoparticles from polymer nanocomposites exposed to UV radiation
 S.A. Rabb, L.L. Yu, T. Nguyen
 National Institute of Standards and Technology, US
-Developing a Strategy for the Spatial Localisation and Autonomous Release of Silver Nanoparticles within Smart Implants
 L.A.A. Newton, D.G. Sharp, R. Leslie, J. Davis
 Nottingham Trent University, UK
-Nanoparticle release from nano-containing product, introduction to an energetic approach
 L. Gheerardyn, O. Le Bihan, E. Dore, M. Morgeneyer
 INERIS, FR
-Poly(vinyl chloride)/TiO2 nanocomposite resin via the synthesis of TiO2 nanoparticles in vinyl chloride followed by in situ suspension polymerization
 H. Yoo, S.-Y. Kwak
 Seoul National University, KR
-Functionalization of Carbon Nanotubes for Advanced CNT/LCP Nanocomposites
 N.G. Sahoo, H.K.F. Cheng, L. Li, S.H. Chan, J. Zhao
 Nanyang Technological University, SG
-Atomistic-Based Continuum Modeling of the Interfacial Properties of Structural Adhesive Bonds
 J.M. Wernik, S.A. Meguid, H. Ruda
 University of Toronto, CA
-Alignment of Si3N4 nanorods in Polypropylene single fibers
 V.K. Rangari, M. Yousuf, S. Jeelani
 Tuskegee University, US
-Trifunctional Epoxy – SWNTs Composites. a New Non – Covalent SWNTs Integration Approach
 J.M. González-Domínguez, A. Ansón-Casaos, A.M. Díez-Pascual, B. Ashrafi, M. Naffakh, A. Johnston, M.A. Gómez, M.T. Martínez
 Instituto de Carboquimica (CSIC), ES
-Synthesis of polynobornene on catalyst functionalized-MWCNTs with a “grafting from” approach: The influence of the catalyst-MWCNT spacing
 P. Longo, C. Costabile, F. Grisi, N. Latorraca, P. Ciambelli, M. Sarno, C. Leone, D. Sannino
 University of Salerno, IT
-Quantum Dot - Fibre Composites
 A. Zeller, J. Johnston
 Victoria University of Wellington, NZ
-Nanogold and Nanosilver Plastics
 M. Pobedinsky, J. Johnston
 Victoria University of Wellington, NZ
-Wide Area Deposition of Transparent Flexible Nanocomposites
 T. Druffel
 Optical Dynamics, US
-Fabrication and Characterization of the GaP/PGMA Polymer Nanocomposite for Advanced Light Emissive Device Structures
 S.L. Pyshkin, J. Ballato, I. Luzinov, B. Zdyrko
 Academy of Sciences, MD
-Carbon Nanocomposite Electrode for Electrostatic Precipitators
 K. Alam, J. Morosko, D. Burton
 Ohio University, US
-Nanopalladium – Wool: A Novel Fibre for Multifunctional
 C. Fonseca-Paris, J.H. Johnston
 Victoria University of Wellington, NZ
-Novel Nanocomposites: Hierarchically Ordered Porous Silica for the Immobilisation of Enzyme as Bio-catalyst
 Y. Sen, T. Sen
 University of Central Lancashire, UK
-The physical properties of zein nanoclay hybrid resin as a base for zein nanoclay films
 J. Luecha, N. Sozer, J.L. Kokini
 University of Illinois at Urbana Champaign, US
-Nanogold and Nanosilver Wool: New Products for High Value Fashion Apparel and Functional Textiles
 J. Johnston, K. Burridge, F. Kelly, A. Small
 Victoria University of Wellington, NZ
-Deposition of layered TiO2/N,C-ITO film electrodes for solar hydrogen production via water splitting
 K.R. Wu, C.H. Hung, C.W. Yeh, C.C. Wang, T.P. Cho
 National Kaohsiung Marine University, TW
-Effect of Bimodal Micro-Nano Powder Mixture on the Solids Loading and Pressureless Sintering of Silicon Carbide and Aluminum Nitride
 V. Onbattuvelli, G. Purdy, S. Ramamoothi, S.V. Atre
 Oregon State University, US
-Preparation, properties and thermal control applications of silica aerogel infiltrated with solid-liquid phase change materials
 Z. Xiangfa, X. Hanning, F. Jian, Z. Changrui, J. Yonggang
 HuNan University, CN
-Multifunctional Nanocomposite Systems
 A. Das, J. Dinglasan, N. Loukine, D. Anderson
 Vive Nano, CA
-‘In situ polymerization and composite formation’ (IPCF): An important synthesis route in advanced materials science
 K. Mallick, M.J. Witcomb, A.M. Strydom
 Mintek, ZA
-Graphene and polymer composite using easy soluble expanded graphite
 J.H. Lee
 SungKyunKwan University, KR
-Thermomechanical Properties of Epoxy Resin MWCNts Nanocomposites
 A. Kanapitsas, H. Zois, C.G. Delides
 Technological Educational Institute of Lamia Department of E, GR
-Ag-TiO2 Coated Polyurethane Composite Nanofiber Web for Application in the Protection against Chemical and Biological Warfare Agent
 S.-Y. Ryu, W.H. Choi, C.H. Ahn, S.-Y. Kwak
 Seoul National University, KR
-Development of Melt Blown Electrospinning Apparatus of Isotactic Polyproylene
 K. Watanabe, Y.J. Lee, T. Nakamura, K.H. Lee, K.W. Kim, B.S. Kim, I.S. Kim
 Shinshu University, JP
-Magnetic Dye-Adsorbent Catalyst: A “Core-Shell” Nanocomposite
 S. Shukla, M.R. Varma, K.G. Suresh, K.G.K. Warrier
 Council of Scientific and Industrial Research (CSIR), IN
-Nanohybrid silica/polymer subcritical aerogels
 A. Fidalgo, L.M. Ilharco, J.P.S. Farinha, J.M.G. Martinho
 Centro de Química-Física Molecular, Instituto Superior Técnico, PT
-The magnetic properties optimization in diluted magnetic oxide semiconductor nanoparticles obtained by a modified co-precipitation approach in intrazeolitic networks
 R. Bosinceanu, F. Iacomi
 Al.I.Cuza, RO
-Evaluations of PP-g-GMA and PP-g-HEMA as a Compatibilizer for Polypropylene/Clay Nanocomposites
 D.H. Kim, Y. Son
 Kongju National University, KR
ISBN:978-1-4398-3401-5
Pages:976
Hardcopy:$189.95
 
Order:Mail/Fax Form
Up
© 2014 Nano Science and Technology Institute. All Rights Reserved.
Terms of Use | Privacy Policy | Contact Us | Site Map