Nano Science and Technology Institute - NSTI  
Nano Science and Technology Institute   Home | Subscribe | Site Map  
  ABOUT | COURSES | EVENTS | PUBLICATIONS | LEADERSHIP | OUTREACH | NEWS | PRESS | JOBS | Nanotechnology Solutions
px
px fade_top
Publications
Nanotech 2008 CDROM
Nanotech 2007 CDROM
Nanotech 2006 CDROM
Nanotech 2005 CDROM
Nanotech 2004 CDROM
3 CDROM Special Offer
Nanotech 2008 Vol. 1
Nanotech 2008 Vol. 2
Nanotech 2008 Vol. 3
Nanotech 2007 Vol. 1
Nanotech 2007 Vol. 2
Nanotech 2007 Vol. 3
Nanotech 2007 Vol. 4
Nanotech 2006 Vol. 1
Nanotech 2006 Vol. 2
Nanotech 2006 Vol. 3
Nanotech 2005 Vol. 1
Nanotech 2005 Vol. 2
Nanotech 2005 Vol. 3
WCM 2005
Nanotech 2004 Vol. 1
Nanotech 2004 Vol. 2
Nanotech 2004 Vol. 3
Nanotech 2003 Vol. 1
Nanotech 2003 Vol. 2
Nanotech 2003 Vol. 3
Nanotech 2002 Vol. 1
Nanotech 2002 Vol. 2
Nanotech 2001 Vol. 1
Nanotech 2001 Vol. 2
MSM 2000
MSM 99
MSM 98
Index of Authors
Index of Keywords
Index of Affiliations
Library Request Form
Shopping Cart
Order Form
 
Publications Publications
Nanotech 2004 Vol. 3
p
 
Technical Proceedings of the 2004 NSTI Nanotechnology Conference and Trade Show, Volume 3
Nanotech 2004 Vol. 3
Technical Proceedings of the 2004 NSTI Nanotechnology Conference and Trade Show, Volume 3
 
Chapter 5: Carbon Nano Structures and Devices
 

Electrochemical Storage of Hydrogen in Carbon Nanotubes

Authors:S-R Chung, K-W Wang and T-P Perng
Affilation:National Tsing Hua University, TW
Pages:252 - 255
Keywords:electrochemical hydrogenation, carbon nanotubes, discharge capacity, catalyst
Abstract:The electrochemical hydrogenation property of carbon nanotubes (CNTs) was investigated. A slurry consisting of CNTs and a binder was pasted on a Ni foam to form an electrode. The discharge capacity was tested in an alkaline electrolyte. The CNTs were prepared by different methods, including chemical vapor deposition (CVD) using different catalysts (Co, Ni, etc.) in an atmosphere of C2H2/N2/H2 at 750oC, arc discharge (AD) using Ni-Y as catalyst under He atmosphere, or laser ablation (LA) using Co or Ni catalyst. All of the CNTs contained various amounts of residual metal catalyst. Carbon black powder (CBP) was also tested. A high discharge capacity of 200 mAh/g of the CVD-Co electrode was obtained, followed by CVD-Ni (50 mAh/g), AD (8 mAh/g) and CBP (8 mAh/g) at room temperature. The CNTs were purified by HNO3 to get a purity higher than 95%, and similar test was conducted. It was found that the discharge capacities were dramatically recuced. For example, the discharge capacity of CVD-Co was reduced to only 32 mAh/g. When the purified CNTs were deposited with a controlled amount of metal on the surface, the discharge capacity was improved significantly. For example, Fig.1 shows the discharge capacities of one sample electrode (CVD-Co0.4Mg0.6) subjected to various treatments. The original (purified) sample exhibits negligible capacity. When it was soaked with 3 and 6.3% Co(No3)2, the discharge capacities were raised to about 25mAh/g. When the salt was reduced to metallic Co, the capacities were further increased to 100 and 170 mAh/g, respectively. It is postulated that the electrochemical hydrogen storage by carbon nanotubes might be influenced by the catalytic effect.
ISBN:0-9728422-9-2
Pages:561
Hardcopy:$150.00
 
Order:Mail/Fax Form
Special:3 CD Set — 15% off with Free Shipping
Up
nanoPRwire™
nanoPRwire
News Headlines
nano World news
 
 
 
 
px
© Nano Science and Technology Institute     About NSTI | Terms of Use | Privacy Policy | Contact